Mounting Hardware 10 Pack.
Ten complete mounting sets for the Novaa rack — ball nut, spring washer, standard washer and a 16 mm M8 button-head bolt in each. The hardware you always end up needing one more of.
Buy the hardware once.
Stop counting nuts.
Every bracket, mount and accessory on the rack fixes the same way. A pack of ten sets means the next thing you bolt on is already sorted.
A complete set, ten times
Ball nut, spring washer, standard washer and a 16 mm M8 button-head bolt. Not a bag of nuts you then have to find bolts for.
Spring-loaded ball
The ball bearing holds the nut where you put it in the T-slot, so it doesn't slide off down the extrusion while you line the bracket up.
Spring washer included
The spring washer is what stops a fixing backing off on corrugations. It's in every set rather than sold separately.
How a fixing goes together.
~1 MIN · 1 PERSON · ALLEN KEY
Seat the ball nut
Slide the ball nut into the T-slot at the point you want to fix. The spring-loaded ball holds it there while you work.
Stack and tighten
Bolt through the bracket, then the standard washer, then the spring washer, into the ball nut. Nip it up with an allen key.
What's in one pack.
Ball nut
M8 × 1.25, spring-loaded
Spring washer
Stops the fixing backing off
Standard washer
Spreads the load under the head
M8 button-head bolt
16 mm, allen key drive
The numbers, all in one spot.
Confirmed against the product master spec. If a figure you need isn't here, send us a message — we won't guess.
Mounting hardware 10 pack
- Pack contents
- 10 × ball nut, 10 × spring washer, 10 × standard washer, 10 × M8 button-head bolt
- Thread
- M8 × 1.25
- Bolt
- M8 button head, 16 mm
- Ball nut
- Spring-loaded ball bearing
- Mounting
- 40 mm T-slot extrusion on the Novaa rack
System
- Total system load
- 150 kg
- Per cargo carrier
- 50 kg
- Tow rating retained
- 3.5 t
- Fitment
- Any 50 mm hitch + 800 mm door clearance
Build & warranty
- Warranty
- Lifetime fixable
- Design
- Designed & tested in Australia
Common questions.
What's in a pack?
Ten complete mounting sets — 10 ball nuts, 10 spring washers, 10 standard washers and 10 M8 button-head bolts, 16 mm long.
Do I need these if I've bought a bracket?
No — brackets and accessories come with the hardware to fit them. The pack is for adding extra mounting points, or for keeping spares in the rig.
What size are they?
M8 × 1.25 thread, with a 16 mm button-head bolt.
Can I buy just one?
The hardware is sold in packs of ten sets. If you need a single fixing for a warranty repair, message us and we'll sort it.
